How do i install a natural gas to lp gas conversion kit on a range oven? - natural gas conversion
I've already bought the conversion kit, but the parties did not see fit in any accessory
Friday, January 15, 2010
Natural Gas Conversion How Do I Install A Natural Gas To Lp Gas Conversion Kit On A Range Oven?
Subscribe to:
Post Comments (Atom)
4 comments:
I thought I just answered that --
His team consists of five campaigns. These pieces are made of brass 1 / 2 "long with a lot at one end and a small hole in the other.
The new holes will be smaller than the other beings in the form of dry gas has a higher calorific value and therefore use less volume.
Get some pipe dope.
Is from the burner and the hood when the burner tube ends. With a 1 / 2 "wrench remove the four bells in the upper valves. Put some pipe dope on the threads and replace them with new bells.
Do the same with your furnace.
Note that most of the beaches are "universal and does not need a kit. Loosen and remove the cover as shown above. If there is a bronze pin, which deviate from the center of the exhaust valve showing a small hole in them. Otherwise, everything what you develop to go around the bell for about a strict & 1 / 2 twists and himself.
Good luck. That is really not as difficult as it seems
NO
Some stoves are made to convert
But if yours is not one of them your screwed
NO
Some stoves are made to convert
But if yours is not one of them your screwed
You're a good man, sir! Call a professional. Your wife will thank me!
Post a Comment